Abrasives

Whether you are a commercial contractor, an industrial manufacturer, or just a do-it-yourselfer, RH Fasteners can meet your needs with an incredible inventory of assembly hardware. And it's not just nuts-n-bolts, we also carry everything from shop supplies to safety equipment!

Here's a listing of the variety of products we carry in this category. But this is just the beginning - be sure to visit our vendor catalog pages to see images, sizes, and part numbers.

AL/OX PAPER SHEET
  • 9x11x100A AL/OX PAPER SHEET
  • 9x11x120A AL/OX PAPER SHEET
  • 9x11x120C AL/OX PAPER SHEET
  • 9x11x100C GARNET PAPER SHEET
  • 9x11x150C AW-C AL/OX PAPER SHEET
  • 9x11x220C AW-C AL/OX PAPER SHEET
  • ABRASIVE BELT
  • 3/4x18x36 GR AL/OX C/C ABRASIVE BELT
  • 3/4×20-1/2×80 GR AL/OX C/C ABRASIVE BELT
  • 3/4×20-1/2×120 GR AL/OX C/C ABR. BELT
  • 2x48x50 GR AL/OX C/C ABRASIVE BELT
  • 2x48x60 GR AL/OX C/C ABRASIVE BELT
  • 2x48x80 GR AL/OX C/C ABRASIVE BELT
  • 2x48x80 GR AL/OX C/C ABRASIVE BELT
  • 2x60x60 GR AL/OX C/C ABRASIVE BELT
  • 3x24x60 GR AL/OX C/C ABRASIVE BELT
  • 4x24x60 GR AL/OX C/C ABRASIVE BELT
  • 4x36x80 GR AL/OX C/C ABRASIVE BELT
  • 4x36x120 GR AL/OX C/C ABRASIVE BELT
  • 6x48x36 GR AL/OX C/C ABRASIVE BELT
  • 6x48x60 GR AL/OX C/C ABRASIVE BELT
  • 6x48x80 GR AL/OX C/C ABRASIVE BELT
  • 6x48x120 GR AL/OX C/C ABRASIVE BELT
  • 6x48x150 GR AL/OX C/C ABRASIVE BELT
  • 6x48x180 GR AL/OX C/C ABRASIVE BELT
  • 3/8x13x80 GR AL/OX C/C ABRASIVE BELT
  • 3/8x13x100 GR AL/OX C/C ABRASIVE BELT
  • 3/8x13x120 GR AL/OX C/C ABRASIVE BELT
  • 1x30x80 GR AL/OX O/C ABRASIVE BELT
  • 3x21x36 GR AL/OX C/C ABRASIVE BELT
  • 4x21x36 GR AL/OX C/C ABRASIVE BELT
  • 4x21x60 GR AL/OX C/C ABRASIVE BELT
  • 6×48-60 GR BELT –USE 61027
  • 1x42x120 GR SILICON CARB WET/DRY BELT
  • 6x48x36 GR ZIRCONIUM ABRASIVE BELT
  • 3x21x50 GR AL/OX O/C ABRASIVE BELT
  • 3x24x60 GR AL/OX O/C ABRASIVE BELT
  • 3x24x80 GR AL/OX O/C ABRASIVE BELT
  • 3x79x60 GR ZIRCONIUM ABRASIVE BELT
  • 3-1/2×15-1/2 COARSE BROWN COND BELT
  • BENCH GRINDER WHEEL
  • 6×3/4×1 A36 TYPE 1 BENCH GRINDER WHEEL
  • 6×3/4×1 A60 TYPE 1 BENCH GRINDER WHEEL
  • 6×1/2×1 A80 TYPE 1 BENCH GRINDER WHEEL
  • 6x1x1 A36 TYPE 1 BENCH GRINDER WHEEL
  • 6x1x1 A80 TYPE 1 BENCH GRINDER WHEEL
  • 7x1x1 A36 TYPE 1 BENCH GRINDER WHEEL
  • 7x1x1 A60 TYPE 1 BENCH GRINDER WHEEL
  • 7x1x1 A80 TYPE 1 BENCH GRINDER WHEEL
  • 8×3/4×1 ARB A36 TYPE 1 BENCH GRINDER WHL
  • 8×3/4×1 ARB A60 TYPE 1 BENCH GRINDER WHL
  • 8×3/4×1 ARB A80 TYPE 1 BENCH GRINDER WHL
  • 8x1x1 A36 TYPE 1 BENCH GRINDER WHEEL
  • 8x1x1 A60 TYPE 1 BENCH GRINDER WHEEL
  • 8x1x1 A80 TYPE 1 BENCH GRINDER WHEEL
  • 10x1x1-1/4 A36 TYPE 1 BENCH GRINDER WHL
  • 10×1-1/2×1-1/4 A60 TYPE 1 BENCH GRIND WH
  • 10×1-1/2×1-1/4 A46 TYPE 1 BENCH GRIND WH
  • 12x2x1-1/2 A60 TYPE 1 BENCH GRINDER WHL
  • 12x2x1-1/2 A36 TYPE 1 BENCH GRINDER WHL
  • 14x2x1-1/2 A60 TYPE 1 BENCH GRINDER WHL
  • 14x2x1-1/2 A36 TYPE 1 BENCH GRINDER WHL
  • 6x1x1 GC60 TYPE 1 BENCH GRINDER WHEEL
  • 4×1/4×3/8 A24N TYPE 27 GRINDING WHEEL
  • 4×1/4×5/8 A24R TYPE 27 GRINDING WHEEL
  • 4×1/4×5/8 A24N TYPE 27 GRINDING WHEEL
  • 4×1/4×5/8 A46N TYPE 27 GRINDING WHEEL
  • 4-1/2×1/4×7/8 ATTACKER TYPE 27 GRIND WHL
  • 4-1/2×1/4×7/8 A24N TYPE 27 GRINDING WHL
  • 4-1/2×1/4×7/8 A46N TYPE 27 GRINDING WHL
  • 4-1/2×1/4×7/8 A24R TYPE 27 GRINDING WHL
  • 5×1/4×7/8 A24N TYPE 27 GRINDING WHEEL
  • 5×1/4×7/8 A24T TYPE 27 GRINDING WHEEL
  • 6×1/4×7/8 A24N TYPE 27 GRINDING WHEEL
  • 6×1/4×7/8 A24R TYPE 27 GRINDING WHEEL
  • 7×1/4×7/8 A24R TYPE 27 GRINDING WHEEL
  • 7×1/4×7/8 A46N TYPE 27 GRINDING WHEEL
  • 7×1/4×5/8-11 A24N TYPE 27 GRINDING WHEEL
  • 7×1/4×5/8-11 A24R TYPE 27 GRINDING WHEEL
  • 7×1/4×5/8-11 A46N TYPE 27 GRINDING WHEEL
  • 7×1/4×5/8-11 SAITECH TYPE 27 GRIND WHL
  • 9×1/4×7/8 A46N TYPE 27 GRINDING WHEEL
  • 9×1/4×5/8-11 A24N TYPE 27 GRINDING WHEEL
  • 9×1/4×5/8-11 A24R TYPE 27 GRINDING WHEEL
  • 4-1/2×1/4×5/8-11 A24N TYPE 27 GRIND WHL
  • 4-1/2×1/4×5/8-11 A24R TYPE 27 GRIND WHL
  • 5×1/4×5/8 A24T TYPE 27 GRINDING WHEEL
  • 3×1/8×3/8 A24R TYPE 27 GRINDING WHEEL
  • 4×1/8×3/8 A24R TYPE 27 GRINDING WHEEL
  • 4×1/8×5/8 C24R TYPE 27 GRINDING WHEEL
  • 5x.045×7/8 A60S TYPE 27 GRINDING WHEEL
  • CHOP WHEEL
  • 16×3/32×1 SK TYPE 1 CHOP SAW BLADE
  • 12×3/32×1 SK TYPE 1 CHOP SAW BLADE
  • 14×1/8×1 TYPE 1 STREET SAW BLADE C16
  • 14×3/32×1 SK TYPE 1 CHOP SAW BLADE
  • 14×3/32×1 IW TYPE 1 CHOP SAW BLADE
  • 14×3/32×1 A46N TYPE 1 CHOP SAW BLADE
  • 14×3/32×1 SAITECH 1 CHOP SAW BLADE
  • 14×3/16×1 C24R TYPE 1 FOR STREET SAW
  • 18×3/16×1 A24R TYPE 1 CHOP SAW BLADE
  • 20×3/16×1 A24R TYPE 1 CHOP SAW BLADE
  • 20×3/16×1 A24R TYPE 1 CHOP SAW BLADE
  • CLOTH DISCS
  • 5×50 GR PSA CLOTH DISC
  • 6×36 GR PSA CLOTH DISC
  • 6×80 GR PSA CLOTH DISC
  • 6×120 GR PSA CLOTH DISC
  • 6×220 GR PSA CLOTH DISC
  • 6×320 GR PSA CLOTH DISC
  • 7×40 GR PSA CLOTH DISC
  • 7×80 GR PSA CLOTH DISC
  • 8×36 GR PSA CLOTH DISC
  • 9×36 GR PSA CLOTH DISC
  • 10×40 GR PSA CLOTH DISC
  • 12×40 GR PSA CLOTH DISC
  • 12×50 GR PSA CLOTH DISC
  • 12×60 GR PSA CLOTH DISC
  • 12×80 GR PSA CLOTH DISC
  • CUT OFF WHEEL
  • 3×1/16×3/8 A36T TYPE 1 CUT-OFF WHL-THIN
  • 3×1/16×3/8 A60T TYPE 1 CUT-OFF WHL-THIN
  • 3×1/16×1/4 A36T TYPE 1 CUT-OFF WHL-THIN
  • 3x.035×3/8 A36T TYPE 1 CUT-OFF WHL-THIN
  • 3x.035×1/4 A36T TYPE 1 CUT-OFF WHL-THIN
  • 3x.035×1/4 A60T TYPE 1 CUT-OFF WHL-THIN
  • 3×1/8×3/8 A24R TYPE 1 CUT-OFF WHL-THIN
  • 4×1/16×3/8 A36T TYPE 1 CUT-OFF WHL-THIN
  • 4x.035×3/8 A36T TYPE 1 CUT-OFF WHL-THIN
  • 4-1/2x.045×7/8 A60S CUT OFF WHEEL TYPE-1
  • 4-1/2×5/64×7/8 A30S CUT OFF WHEEL
  • 5x.045×7/8 A60S CUT OFF WHEEL TYPE-1
  • 6x.045×7/8 A60S CUT OFF WHEEL TYPE-1
  • 4-1/2x.045×7/8 CUT OFF WHEEL TYPE-1
  • 7×3/32xDIA.(5/8) A24R CUT-OFF WHEEL TP 1
  • 7×5/64xDIA.(5/8) A30S CUT-OFF WHEEL TP 1
  • 8×3/32xDIA.(5/8) A30S CUT-OFF WHEEL TP 1
  • 15x.045×7/8 TYPE 1 Z-TECH CUTTING WHEEL
  • 12×1/8×7/8 A24R TYPE 1 CUT-OFF WHL
  • 12×1/8×1 A24R TYPE 1 CUT-OFF WHL
  • 12×1/8×1 C24R TYPE 1 CUT-OFF WHL
  • 12×1/8x20MM A24R TYPE 1 CUT-OFF WHL
  • 12×1/8x20MM C24R TYPE1 CUT-OFF WHL
  • 12×1/8x20MM DUCTILE TYPE 1 CUT-OFF WHL
  • 14×1/8x20MM A30S TYPE 1 CUT-OFF WHL
  • 14×1/8×1 A24R TYPE 1 CUT-OFF WHL
  • 14×1/8×1 C24R TYPE 1 CUT-OFF WHL
  • 14×1/8×1 DUCTILE TYPE1 CUT-OFF WHL
  • 14×1/8x20MM C24R TYPE1 CUT-OFF WHL
  • 12×1/8×1 M.A.C. TYPE1 CUT-OFF WHL
  • 14×1/8×1 HOBO TYPE 1 CUT OFF WHEEL
  • 10×1/8×5/8 A36R TYPE 1 CUT-OFF WHL
  • 14×1/4×1 C24R TYPE 1 CUT-OFF WHL
  • 4-1/2×7/8x36gr EX-THIN CUT-OFF
  • 6×7/8x.045 ZIRC. TYPE 27 CUT-OFF WHEEL
  • 4-1/2×1/8×7/8 CONCRETE DIAMOND CUT
  • 1/4×3/8 ADAPTOR FOR TYPE 1 CUT OFF WHEEL
  • 7×1/4×5/8-11 A24R TYPE 28 CUTTING WHEEL
  • 4-1/2×3/32×7/8 A24R TYPE 27 CUTTING WHL
  • 4-1/2x.045×7/8 A60S TYPE 27 CUTTING WHL
  • 4-1/2×1/8×7/8 TURBO TYPE 27 CUT/GRIND
  • 6x.045×7/8 A60S TYPE 27 CUTTING WHEEL
  • 7×1/8×5/8-11 PIPELINE TYPE 27 CUT WHEEL
  • 7×3/32×7/8 A24R TYPE 27 CUT WHEEL
  • 7×3/32×5/8-11 A24R TYPE 27 CUTTING WHEEL
  • 4-1/2×1/8×7/8 SAITECH TYPE 27 CUT WHEEL
  • 6x.045×7/8 TYPE 27 SAITECH CUTTING
  • 4-1/2×1/8×5/8-11 PIPELINE TYPE 27
  • 10×3/32×5/8 GTK-7FG EVERETT CUTOFF WHEEL
  • 14×3/32×1 GTK-7FG EVERETT CUTOFF WHEEL
  • 5×7/8 3M SANDING DISC
  • #2115 DAREX DIAMOND WHEEL FOR 135 DEGREE
  • #2121 DAREX DIAMOND WHEEL FOR 135 DEGREE
  • DISK ROLL
  • 5×80 GR PSA DISC ROLL 100pc/ROLL
  • 5×120 GR PSA DISC ROLL 100pc/ROLL
  • 6×80 GR PSA DISC ROLL 100pc/ROLL
  • 5×80 GRIT PSA DISC ROLL
  • 1-1/2x25ydx80gr SAITSCREEN ROLL
  • 1-1/2x25ydx180gr SAITSCREEN ROLL
  • FIBER DISC
  • 4-1/2×7/8×60 GR 3A AL/OX FIBER DISC
  • 4-1/2×7/8×120 GR 3A AL/OX FIBER DISC
  • 5×7/8×24 GR 2A AL/OX FIBER DISC
  • 5×7/8×36 GR 2A AL/OX FIBER DISC
  • 5×7/8×50 GR 2A AL/OX FIBER DISC
  • 5×7/8×60 GR 2A AL/OX FIBER DISC
  • 5×7/8×80 GR 2A AL/OX FIBER DISC
  • 5×7/8×100 GR 2A AL/OX FIBER DISC
  • 7×7/8×150 GR SILICON CARBIDE FIBER DISC
  • 4×5/8×36 GR 2A AL/OX FIBER DISC
  • 4×5/8×60 GR 2A AL/OX FIBER DISC
  • 4×5/8×80 GR 2A AL/OX FIBER DISC
  • 4×5/8×100 GR 2A AL/OX FIBER DISC
  • 4×5/8×120 GR 2A AL/OX FIBER DISC
  • 7×7/8×24 GR 2A AL/OX FIBER DISC
  • 7×7/8×36 GR 2A AL/OX FIBER DISC
  • 7×7/8×60 GR 2A AL/OX FIBER DISC
  • 7×7/8×80 GR 2A AL/OX FIBER DISC
  • 7×7/8×120 GR 2A AL/OX FIBER DISC
  • 4-1/2×7/8×80 GR ZIRCONIUM FIBER DISC
  • 7×7/8×36 GR ZIRCONIUM FIBER DISC
  • 7×7/8×36 GR CERAMIC LITE FIBER DISC
  • 7×7/8×50 GR ZIRCONIUM FIBER DISC
  • 7×7/8×80 GR ZIRCONIUM FIBER DISC
  • 7×7/8×60 GR ZIRCONIUM FIBER DISC
  • 7×7/8×80 GR ZIRCONIUM FIBER DISC
  • 4×5/8×50 GR 2A AL/OX FIBER DISC
  • 4×5/8×100 GR 2A AL/OX FIBER DISC
  • 4-1/2×7/8×24 GR 2A AL/OX FIBER DISC
  • 4-1/2×7/8×36 GR 2A AL/OX FIBER DISC
  • 7×7/8×16 GR 2A AL/OX FIBER DISC
  • 7×7/8×50 GR 2A AL/OX FIBER DISC
  • 7×7/8×80 GR 2A AL/OX FIBER DISC
  • 4-1/2×5/8-11×24 GR 2A AL/OX FIBER DISC
  • 4-1/2×5/8-11×36 GR 2A AL/OX FIBER DISC
  • 4-1/2×5/8-11×80 GR 2A AL/OX FIBER DISC
  • 4-1/2×5/8-11×36 GR ZIRCONIUM FIBER DISC
  • 4-1/2×7/8×36 GR 2A AL/OX FIBER DISC
  • 4-1/2×7/8×50 GR A2 AL/OX FIBER DISC
  • 4-1/2×7/8×60 GR A2 AL/OX FIBER DISC
  • 4-1/2×7/8×80 GR A2 AL/OX FIBER DISC
  • 4-1/2×7/8×120 GR 2A AL/OX FIBER DISC
  • FLAP WHEEL
  • 1×3/4×1/4×60 GR FLAP WHEEL
  • 1×3/4×1/4×80 GR FLAP WHEEL
  • 1x1x1/4×60 GR FLAP WHEEL
  • 1x1x1/4×120 GR FLAP WHEEL
  • 1-1/2x1x1/4×60 GR FLAP WHEEL
  • 1-1/2x1x1/4×80 GR FLAP WHEEL
  • 1-1/2x1x1/4×240 GR FLAP WHEEL
  • 2x1x1/4×60 GR FLAP WHEEL
  • 2x1x1/4×80 GR FLAP WHEEL
  • 2-1/2x1x1/4×60 GR FLAP WHEEL
  • 3x1x1/4×60 GR FLAP WHEEL
  • 6x1x1x80 GR LARGE FLAP WHEEL
  • FLAP DISC
  • 4×5/8×40 GR 3A SAITLAM FLAP DISC
  • 4×5/8×80 GR 2A SAITLAM FLAP DISC
  • 4-1/2×7/8×80 GR 2A SAITLAM FLIP DISC
  • 6-1/2×7/8×80 GR 2A SAITLAM FLAP DISC
  • 4-1/2×7/8×40 GR ZIRCONIUM FLAP DISC
  • 4-1/2×7/8×60 GR ZIRCONIUM FLAP DISC
  • 4-1/2×7/8×80 GR ZIRCONIUM FLAP DISC
  • 4-1/2×5/8-11x40gr SAITLAM F FLAP DISC
  • 4-1/2×5/8-11×80 GRIT SAITLEAM “F” DISC
  • INDUSTRIAL SHOP ROLL
  • 2-1/2x50ydx50gr EA-F IND. SHOP ROLL
  • 1x50ydx60gr DA-F INDUSTRIAL SHOP ROLL
  • 1-1/2x50ydx60gr EA-F IND. SHOP ROLL
  • 1x50ydx80gr DA-F INDUSTRIAL SHOP ROLL
  • 1-1/2x10ydx80gr DA-F MINI SHOP ROLL
  • 1x50ydx80gr EA-F INDUSTRIAL SHOP ROLL
  • 1-1/2x50ydx80gr EA-F IND. SHOP ROLL
  • 2x50ydx80gr EA-F INDUSTRIAL SHOP ROLL
  • 1x50ydx100gr EA-F INDUSTRIAL SHOP ROLL
  • 1-1/2x50ydx100gr EA-F IND. SHOP ROLL
  • 2x50ydx10gr EA-F INDUSTRIAL SHOP ROLL
  • 1x50ydx120gr EA-F INDUSTRIAL SHOP ROLL
  • 1x50ydx120gr EA-F INDUSTRIAL SHOP ROLL
  • 1-1/2x50ydx120gr EA-F IND. SHOP ROLL
  • 2x50ydx120gr EA-F INDUSTRIAL SHOP ROLL
  • 2x50ydx120gr EA-F INDUSTRIAL SHOP ROLL
  • 1x50ydx150gr EA-F INDUSTRIAL SHOP ROLL
  • 1-1/2x50ydx180gr DA-F HANDY SHOP ROLL
  • 1-1/2x10ydx180gr DA-F MINI SHOP ROLL
  • 1x50ydx180gr EA-F INDUSTRIAL SHOP ROLL
  • 1-1/2x50ydx180gr EA-F IND. SHOP ROLL
  • 2x50ydx180gr EA-F INDUSTRIAL SHOP ROLL
  • 1x50ydx220gr EA-F INDUSTRIAL SHOP ROLL
  • 1-1/2x50ydx220gr EA-F IND. SHOP ROLL
  • 2x50ydx220gr EA-F INDUSTRIAL SHOP ROLL
  • 1x50ydx240gr EA-F INDUSTRIAL SHOP ROLL
  • 2x50ydx240gr EA-F INDUSTRIAL SHOP ROLL
  • 1x50ydx320gr EA-F INDUSTRIAL SHOP ROLL
  • 1-1/2x50ydx320gr EA-F IND. SHOP ROLL
  • 2x50ydx320gr EA-F INDUSTRIAL SHOP ROLL
  • MISCELLANEOUS
  • 4x.020×5/8-11 STRINGER BEAD DUALIFE
  • 4x.020×5/8-11 STRINGER BEAD DUALIFE S/S
  • 14x.125×1 T-SEG MASONRY BLADE WET/DRY
  • 1x50yd CROCUS CLOTH
  • 3x19x1-3/16 CURVED HANDLE BRUSH 13-3/4 L
  • 9×1/8×5/8-11 TYPE 27 PIPELINE
  • 4-1/2×1/4×5/8-11 NORTON CHARGER PLUS GR.
  • 7×1/4×5/8-11 NORTON CHARGER PLUS GRINDER
  • 2x3x5/8-11 A16 TYPE 16 CONE
  • 2-3/4×3-1/2×5/8-11 A16 TYPE 16 CONE
  • 1-1/2×2-1/2×5/8-11 A20 TYPE 17 CONE
  • 6×4-3/4×5/8-11 A16 TYPE 11 CUP GRINDING
  • 2x30ft “A” VERY FINE CLEAN & FINISH ROLL
  • 4-1/2×7/8x80gr VORTEC PRO Z FLAP DISC
  • 5×80 GR HOOK & LOOP DISC w/8 VAC HOLES
  • 4-1/2×7/8x120GR Z3 ZIRC. FLIP DISC
  • 4-1/2×7/8x.090 TURBO CC DIAMOND PREM+
  • 5×7/8x.090 TURBO CC DIAMOND PREM+
  • 14x.110×1 MASONARY SAW DIAMOND
  • 2-1/2x60x36gr Z-H BELT ZIRCONIUM
  • 4″ COARSE BROWN COND. DISC
  • 4″ MEDIUM MAROON COND. DISC
  • REUSABLE ADAPTOR KIT TYPE 27
  • 1-7/8 REDUCER BUSHING FOR TYPE 1 CUT OFF
  • 5/8-11 LARGE CENTER NUT
  • 2×1/4 DISC HOLDER (DISC)
  • 6×1/2 MUSLIN BUFFING WHEEL
  • MOUNTED PT
  • 1x1x1/4 TYPE W220 VITRIFIED MOUNTED PT.
  • 1×2-3/4×1/4 A3 RESON BONDED MOUNTED PT.
  • 3/4×1-1/8×1/4 A5 RESIN BONDED MOUNTED PT
  • 3/8×3/4×1/4 B52 RESIN BONDED MOUNTED PT.
  • 3/8×1-1/4×1/4 W179 RESIN BONDED MOUNT PT
  • 3/4×3/4×1/4 W204 RESIN BONDED MOUNTED PT
  • 1x1x1/4 W220 RESIN BONDED MOUNTED PT.
  • 1-1/2×1/2×1/4 W236 RESIN BONDED MOUNT PT
  • PADS
  • 6×9 HEAVY DUTY (BROWN) HAND PADS
  • 6×9 GENERAL PURPOSE (MAROON) HAND PADS
  • 6×9 GEN. PURPOSE (MAROON) HAND PADS 3M
  • 6×9 ULTRA FINE (GRAY) HAND PADS
  • 6×9 GENERAL PURPOSE (GREEN) HAND PADS
  • 17″ thick WHITE NYLON FLOOR PAD
  • 17″ thick TAN NYLON FLOOR PAD
  • 20″ thick BLACK NYLON FLOOR PAD
  • 4×5/8-11 MEDIUM GRADE BACKING PAD
  • 4-1/2×5/8 MEDIUM GRADE BACKING PAD w/NUT
  • 5×5/8 MEDIUM GRADE BACKING PAD w/NUT
  • 7×5/8-11 MEDIUM GRADE BACKING PAD
  • 2×1/4 PSA BACKING PAD
  • 5×5/16-24 PSA BACKING PAD
  • 6-1/2 SAITIAM BACKING PAD ASSEMBLY L
  • HANDLE FOR 6×9 CONDITIONING PADS
  • 4×1/4 BACKING PAD FOR SURFACE COND DISC
  • 4-1/2×5/8-11 BACKING PAD FOR COND DISC
  • 7×5/8-11 BACKING PAD FOR COND. DISC
  • 4-1/2×5/8 SMOOTH STYLE BACKING PAD
  • 4-1/2×5/8 NEW STYLE BACKING PAD WITH
  • 6×9 VERY FINE A/O BEAR-TEX
  • SAIT-LOK-R
  • 3×60 GR A3 LAMINATED DISC SAIT-LOK-R
  • 3×80 GR 3A LAMINATED DISC SAIT-LOK-R
  • 3×120 GR 3A LAMINATED DISC SAIT-LOK-R
  • 2×36 GR 2A LAMINATED DISC SAIT-LOK-R
  • 2×40 GR 2A LAMINATED DISC SAIT-LOK-R
  • 2×50 GR 2A LAMINATED DISC SAIT-LOK-R
  • 2×60 GR 2A LAMINATED DISC SAIT-LOK-R
  • 3×36 GR 2A LAMINATED DISC SAIT-LOK-R
  • 3×50 GR 2A LAMINATED DISC SAIT-LOK-R
  • 2×40 GRT ZIRCONIUM DISC SAIT-LOK-R EASY
  • 2×60 GRT ZIRCONIUM DISC SAIT-LOK-R EASY
  • 2″ COARSE BROWN SAIT-LOK-R COND
  • 2″ MED. MAROON SAIT-LOK-R COND DISC
  • 3″ COARSE BROWN SAIT-LOK-R COND DISC
  • 3″ MEDIUM MAROON SAIT-LOK-R COND DISC
  • 2×1/4 SAIT-LOK BACKING PAD MEDIUM
  • 1-1/2×1/4 SAIT-LOC-R BACKING PAD
  • 2×1/4 SAIT-LOC-R BACKING PAD
  • 3×1/4 SAIT-LOK-R BACKING PAD
  • 3″ MED MAROON SAIT-LOK COND DISC
  • SHEETS
  • 9x11x60C WATERPROOF SHEET SIL/CARD.
  • 9x11x120C WATERPROOF SHEET SIL/CARB
  • 4-3/16x11x120C DRY WALL SHEET DIECUT
  • 4-3/16x11x150C DRY WALL SHEET DIECUT
  • 3-5/16x11x100C DRY WALL SHEET PAPER
  • 3-5/16x11x120C DRY WALL SHEET PAPER
  • 9x11x120gr CLOTH SHEET
  • 9x11x240gr CLOTH SHEET
  • 9x11x600C SILICON CARBIDE SHEET
  • 9x11x800C SILICON CARBIDE SHEET
  • 9x11x1200C SILICON CARBIDE SHEET
  • 9x11x50gr CLOTH SHEET
  • 9x11x60gr CLOTH SHEET
  • 9x11x80gr CLOTH SHEET
  • 9x11xK624 CROCUS CLOTH SUPER FINE FOR
  • 5×80 GR PSA PAPER DISC
  • 5×120 GR PSA PAPER DISC
  • 5×220 GR PSA PAPER DISC
  • 9×11 K624 CROCUS CLOTH SHEETS
  • WIRE BRUSH/WHEEL
  • 7x.014×7/8×3/4 ARBOR WIRE WHEEL
  • 3/8×3/4×6 OAL ACID BRUSH
  • 7/16×3/16×6-1/2 OAL ACID BRUSH
  • 1×1-1/2×7-1/2 PAINT BRUSH WOOD HANDLE
  • 2×1-1/2×7-1/2 PAINT BRUSH WOOD HANDLE
  • 3×1-1/2×8 PAINT BRUSH WOOD HANDLE
  • 2-3/4x.014×5/8-11 CRIMPED CRBN CUP BR.
  • 2-3/4x.014xM10-1.25 CRIMPED CRBN CUP BR.
  • 8x.014×1-1/2×5/8 ARBOR WIRE BRUSH
  • 1x.020x1x1/4 KNOT END BRUSH CARBON
  • 1-1/2x.012×5/16×1/4 CIR FLAIR CRIMP END
  • 3x.014×7/8×1/4 CIRC FLARED CRIMPED WIRE
  • 4x.014×1/2 KNOT WIRE WHEEL CARBON
  • 5x.020×5/8-11 STINGER BEAD WIRE WHEEL
  • 6x.025×5/8-11 REG. TWIST PIPELINE BRUSH
  • 6x.020×5/8,1/2 KNOT WIRE WHEEL CARBON
  • 6x.020×5/8-11 KNOT WIRE WHEEL CARBON
  • 6x.020×5/8-11 BLACK ELASTOMER WIRE BRUSH
  • 4x.020×1-3/8×5/8-11 KNOT CUP BRUSH CARBN
  • 6x.020×1-3/4×5/8-11 KNOT CUP BRUSH CARBN
  • 2-3/4x.014×5/8-11 KNOT CUP BRUSH CARBON
  • 2-3/4x.014xM10-1.25 KNOT CUP BRUSH CARBN
  • 4x.014×5/8-11 WIRE WHEEL REG TWIST CARBN
  • 4x.014×1/2-13 WIRE WHEEL REG TWIST CARBN
  • 2-3/4x.020×5/8-11 KNOT CUP BRUSH SS
  • 3x7x.006 SMALL CLEANING BRUSH STAINLESS
  • 3x7x.006 SMALL CLEANING BRUSH BRASS
  • 4x16x.012 S/S WIRE SHOE HANDLE BRUSH
  • 7×1/4×7/8 TYPE 27 GRINDING WHEEL NORTON
  • 3x.014×3/8 KNOT WIRE WHEEL CARBON
  • 1-3/4x.0118×1/4 CRIMPED CUP BRUSH CARBON
  • 6x.008×1-1/16×5/8,1/2 WIRE BRUSH CARBON
  • 6x.014×1-1/16×5/8,1/2 WIRE WHEEL CARBON
  • 7x.014×1-9/16×5/8 WIRE WHEEL CARBON WIDE
  • 10x.014x2x3/4 CRIMPED WIRE WHEEL WIDE
  • 6×1/2×1/4 SOFT BUFF WHEEL 25 PLY
  • 3 GREEN CORPS ROLOC DISC 3M
  • 4-1/2×1/4×7/8 TYPE 27 GRINDING WHL
  • 14×1/4×1 SW HOT PRESSED WHL-STR SAW
  • 4x2x5/8-11 A16 TYPE 11 CUP GRINDING
  •  


    Email Us Below or Call (800) 969-8699 / (816) 587-8699

    Our knowledgeable and experienced reps are dedicated to finding you the part you need, quickly, and at the best price available. Convenient payment options along with flexible, same-day shipping, make RH Fastener your best choice for fasteners throughout the entire midwest. Call and experience the difference.

    Contact Us to Get Your Order Started!

    Contact Us
    Sending